WMN

Automatic Cutting Machine

Application

Automatic cutting machine for tubing cutting, ribbon cutting, webbing cutting, belt cutting, cable cutting, wire cutting, sheet cutting, film cutting etc.

 Tube:  PVC tube, heat shrink tube, PVC heat shrinking tube, fiberglass tube, Teflon tube, corrugated tube, etc.

Cable: Flat cable, copper wire, etc.

Tape: nickel strap, cotton tape, elastic band, plastic tape, zipper, conductive tape, foam, etc.

 Sheet: battery separator, Nickel sheet, diffuser sheet, plastic/rubber sheet, pvc sheet, etc.

 Film: plastic film, reflecting film, double-sided tape, Malar film, insulation paper, PE, Copper/Aluminum foil, release paper, etc.

one machine suitable for cutting various kinds of materials

Features

1.High speed: It can cut 100~120 cut per minute. (50mm long)

2.Accuracy: Cut-length is accurate, cut length can be set between 0.1-9999.9mm.

3.Cutting type: For cold cut and Optional hot cut. Hot cut suitable for materials that needs hot sealing, such as Nylon webbing, polyester webbing, etc.

4.Automatic operation: It works automatically only by setting length and quantity. Save labor, high efficiency.

5.Automatic stopper: It stops automatically if materials run out during operation

6.Memory: Set-length, set-q'ty & set-speed are not erased even if power off & on

7.Application:The cutting machine is suitable for cutting tubes, cable, webbing/ribbon/belt, small wire, sheet and film, etc.

8.High speed, high accuracy, designed for cutting non-adhesive materials.

Specification  

Model: AR-100

1. Voltage: AC220V/50Hz & AC110V/60Hz

2. Power : 250W

3. Cut Length : 0.1-9999.9mm

4. Cut Width : 0-100mm

5. Cutting Thickness : 0-12mm

6. Dimension : L360*W300*H350MM

7. Net Weight : 28kg

Typical specifications